The Hafizal.com blog

Archive for the ‘Drywall’ Category

The following paragraphs summarize the work of Drywall experts who are completely familiar with all the aspects of Drywall. Heed their advice to avoid any Drywall surprises.

Working on a home improvement project can be a lot of fun. However, it can also be a disaster if you don’t know what you are doing. If you don’t know anything about how to tape drywall, then it may be time for you to learn. This is one of the most important skills that you need to learn as a do it yourselfer.

First of all, you need to remember that knowing how to tape drywall is not really that hard to do. However, you have to keep in mind that there is a process to this and you shouldn’t try and cut corners with this one as you will only end up with a drywall installation job that is not at par with what you really want.

To get the job done, you obviously need to have the proper tools and techniques. You need to keep in mind that patience is really a virtue if you are on the process of taping drywall. It’s time consuming and you have to keep in mind that this involves a detailed process. In fact, taping the drywall seams can even take 3 times as long as it takes to hand the drywall.

You have to know how to tape drywall properly because without following the correct process, you will eventually get an unattractive and unprofessional finish. So, here are some instructions on how to complete this kind of project properly in order for you to have great results on the finished taping drywall project.

First, you have to have the right tools for the job. You need to understand the fact that knowing how to tape drywall and having the right tools is half the battle. Although it is possible for you to get the job done without having all the right tools, it may take a lot longer to finish the project than usual.

To tape drywall, you will need a drywall tape, joint compound, and also a good sized drywall knife. You will also need coarse and fine grit sandpaper in order for you to finish the job. Having these tools will make your project a lot easier and it will also help you produce a more professional look.

Truthfully, the only difference between you and Drywall experts is time. If you’ll invest a little more time in reading, you’ll be that much nearer to expert status when it comes to Drywall.

Taping drywall involves knowing the entire process involved in finishing drywalls. It is important for you to understand this process because it will affect the way the finished project look.

Before applying the tape, you first need to apply drywall joint compound on each joint. You may want to apply three layers of the compound and after each layer you have to let it dry completely. Then, sand it and repeat the process three times.

After applying the last layer of joint compound, the next step is to tape the joints.

You have to tape the joints between each sheet of drywall. Then, you have to fill it with drywall compound. After applying the tape is applied, you now have to smooth the drywall compound by using a caulking knife.

Lastly, you have to dry the compound completely and you have to sand it with coarse grit sandpaper first and then the fine grit sandpaper for a smooth and polished look.

These are the proper ways on how to tape drywall. Although it may seem simple, you will find that taping drywall can take some time and patience. With these tips, you can be sure that you will be able to have the necessary knowledge that will give you a more professional look upon finishing the project.

About the Author
By Anders Eriksson, feel free to visit his new GVO affiliate site: GVO

We have to admit that we spend a lot of money decorating our homes. In fact, some people even hire interior decorators just to get a more desirable interior. And, when it comes to drywalls, people are now trying to add a little texture in order for the walls to look livelier and more beautiful. This can be very expensive if you get a professional to do it for you. If you have some extra time, you may want to try doing this project yourself as it will be able to help you save a lot of money.

First of all, you need to keep in mind that there are different ways on how you can add texture on the drywalls on your home. There are simply a lot of options to choose from.

You can choose to get a popcorn texture, which is basically a heavy texture that is usually applied on ceilings to deaden the sound. This can be very advantageous for people who have home theater systems in their home or music rooms as this will help contain the sound inside the room. The disadvantages of popcorn textures is that it is very hard to clean and it can really accumulate a lot of dirt and dust as well as the fact that it is very hard to apply paint on.

Another texture is the knockdown or skriptrowel texture. This texture is very popular as it looks like Spanish-styled stucco. This particular drywall can really bring out the beauty of your home.

The splatter or orange peel texture is another great option for your home. This texture will vary from a sequence of tiny blobs or splatter on the wall and it can also look like a large find spray that resembles an orange peel texture.

Before you start, you need the proper materials for producing the texture effects. Basically, you will need a taping knife, old paintbrushes, stencils, plastic sheeting, soft-bristled brush, and drywall joint compound.

The more authentic information about Drywall you know, the more likely people are to consider you a Drywall expert. Read on for even more Drywall facts that you can share.

To start, you have to take everything attached to the wall off, such as the switch plates and receptacle cover. You have to cover and remove all the furniture away from the wall that you are planning to apply texture on and you also have to protect your floor by using drop clothes.

You should also remove any wallpaper as the drywall compound can have excessive moisture, which can loosen the attached wallpaper, which would be a lot of mess and time consuming for you to clean up.

Then, begin the texture design by putting on the compound along the baseboards and on top of the walls as well as the corner. Depending on the design, the thickness will vary. If you want a rougher texture on your drywall, apply thicker compounds on the wall. You don’t need to be exact during the application as the varying thickness will be able to provide you with better effect for the texture.

You can try varying the texture by using different tools, such as wallpaper brushes and old paintbrushes. You can also use sponges to get that swirl effect or that stroke effect. If you want to be a little bit more creative, you can use your hands or fingers to create a unique and attractive design for your wall.

Just remember that when using your hands, you have to wear latex gloves.

These are the ways on how you can texture drywalls in your home. With a little bit of practice, you will be able to get a professional finish for your drywall. And, you will also be able to save hundreds or even thousands of dollars on professional fees.

Of course, it’s impossible to put everything about Drywall into just one article. But you can’t deny that you’ve just added to your understanding about Drywall, and that’s time well spent.

About the Author
By Anders Eriksson, feel free to visit his new GVO affiliate site: GVO

Before you consider painting your drywall, you have to remember that this is a fairly specialized task. However, if you have the proper equipments or tools and do the necessary preparations, you will find that it can be achieved by nearly everyone.

When painting drywall, you have to know about the step-by-step process in doing it properly. If you neglect to do at least one of the processes, you will end up with a painting job that looks quite amateurish.

The first step in painting drywalls is by making sure that the weather is not too humid and it should be fairly warm. You also have to make sure that the surface or the drywall you are planning to pain is dry, free from oil and grease, and that it is completely clean.

You also have to apply 3 coats of joint compound on the drywall and the joints between the panels should be taped with fiberglass or paper mesh tape or drywall tape. By doing this, you will ensure that the joint gets surfaced over. You also have to make sure that you fill in any cracks or marks using the same method.

It seems like new information is discovered about something every day. And the topic of Drywall is no exception. Keep reading to get more fresh news about Drywall.

You also have to clean the walls and ceilings that you intend on painting by wiping off the dust. Do this before priming. After the prime coat has dried, the next step is to sand the surface lightly with a fine grit sandpaper. This will enable you to smooth any imperfections, and raised fibers as well as rough chips. Always keep in mind that you need to wear goggles and mask as the gypsum dust produced when sanding drywalls can be very irritating to the eyes and is known to cause breathing problems.

You should also take care in removing dust from the top of your doorway as well as in the window trims. You also have to use drop cloths in order to protect finished flooring as well as doors, windows, and other fixtures. It is highly recommended that you use a painter’s plastic to do this.

You need to keep in mind that after you taped the drywall and sanded it, you shouldn’t allow the drywall to sit too long. The sunlight can cause the drywall to yellow and fade. In fact, it can look uneven even after painting it. Use a good quality latex stain-killing paint before you prime it in order to fight the yellowing process.

Two coats of paint should be enough. On the first coat, use a low sheen, latex flat wall paint. This should be tinted to match the color of the top coat. For the top coat, use two coatings of gloss paint, which includes eggshell and satin paint. This will leave you with a finish that is easy to wash and one that is not prone to smudges and marks. For the roof, flat paint is a good option.

Always remember that with the proper equipments and preparation, you will be able to have a professional looking finish when painting your drywall.

You can’t predict when knowing something extra about Drywall will come in handy. If you learned anything new about Drywall in this article, you should file the article where you can find it again.

About the Author
By Anders Eriksson, feel free to visit his new GVO affiliate site: GVO

Water damaged drywall can be a very serious problem. Not only that it will make the drywall look ugly, but it can also weaken it and develop molds, which can cause serious health problems. If you have a water damaged drywall, then it is very likely that you have leaks in your home caused by flooding or piping leaks. It can also be caused by leaks on your roof.

It is very important that you get this kind of problem repaired immediately. So, just what can you do in order for you to fix water-damaged drywall?

First of all, you have to remember that you need to know where the leak is coming from. You have to make sure that you fix the leak first before you continue on in fixing the drywall. Besides, nothing can be more frustrating than having the drywall fixed only to get it water damaged again by the same leak.

You have to keep in mind that in most cases, the leak will not really come from the wall but it can come from the ceiling where the water can travel down to the damaged part of the wall. So, try to look closely for clues as to where the water came from and get the leak fixed first before you continue on with the repairs for the water damaged drywall.

Most of this information comes straight from the Drywall pros. Careful reading to the end virtually guarantees that you’ll know what they know.

After getting the leak repaired, the next step is to cut a hole in to the wet drywall. This will be able to get air to circulate inside the wall and dry it thoroughly. You can use a strong fan to help with the circulation as well as a dehumidifier in order to reduce the moisture content inside the wall and room where the water damaged drywall is located.

You have to keep in mind that it is very important for you to monitor the drying process closely. If you don’t let the drying process complete properly, then mold may begin to develop in as little as 24 to 48 hours. This can make your project more difficult to do as molds can be very difficult to remove and you will need a mold restoration professional for this kind of job.

After the wall is dry and you are absolutely sure that there are no more leaks, you can now replace the drywall and damaged studs. For larger holes, you can use plywood for backers. The next step is to place the patch of water resistant drywall on to the backer board. Then, you will need to place joint compound over the joints and allow it to dry. After it dries, you can sand the joint down for a smooth finish.

The last step is to tape the joint where the drywall comes together with the existing wall. For this, you will want to use a drywall tape. After the edges are already smooth and dry, you can now paint it in order for it to match the entire wall.

With these tips, you will be able to easily repair water damaged drywall. With patience and the proper techniques, you will be able to get rid of water damaged drywall with professional results that will make it look as if the damage wasn’t even there.

There’s a lot to understand about Drywall. We were able to provide you with some of the facts above, but there is still plenty more to write about in subsequent articles.

About the Author
By Anders Eriksson, feel free to visit this new site for my swedish customers: Billigt Webbhotell – from SEK 10:- per month!

Would you like to find out what those-in-the-know have to say about Drywall? The information in the article below comes straight from well-informed experts with special knowledge about Drywall.

It’s really frustrating if water damages our drywall. Not only that it leaves ugly water stain marks on the wall but it can also cause mold to develop, which can be very dangerous to your health. Drywall molds are black molds that can cause a lot of harm on your overall well-being. In fact, it can cause respiratory illnesses, such as bleeding of the lungs and other serious health conditions.

Water damage to drywall is commonly the result of roofing and plumbing leaks. It may seem harmless but this kind of damage to your home is a project that you should take seriously and prioritize. If you are trying to spot water damage on your drywall, you can simply look for bulging, sagging, discoloration, and cracks. These things indicate water damage on your drywall.

You need to keep in mind that water can easily drip and run along interior pipes. So, it is very important that you should look for damage on both the ceilings and the walls. Also, you should keep in mind that you shouldn’t be surprised to find damage that is far away from the leak.

If you only find small cracks, the water damage can be very easy to fix. All you need to do is get a ready mixed spackling compound and apply it on the crack with a putty knife. You can also apply a strip of fiberglass mesh tape, which can strengthen the area where the putty can be applied. However, if you find a much larger damage than a simple crack, then you will be required to do more structural work.

So far, we’ve uncovered some interesting facts about Drywall. You may decide that the following information is even more interesting.

The first step in repairing large portions of water damage in your drywall is to remove all the materials that have been affected. Cut the area of the drywall where the water soaked. In fact, the drywall may already be crumbling. If not, you may need to use a jigsaw or a drywall handsaw to cut away the damaged part of the wall. Always be on the lookout for molds and mildew. If you find molds and mildew clinging on the drywall, then this part of the drywall cannot be saved and should be removed immediately. Also, all the surfaces should be thoroughly cleaned.

After removing the damaged part, you first have to let the area dry completely before you start patching in the holes. Use a high powered fan and a dehumidifier if possible to let air circulate and reduce the moisture content in the air. Allow to dry for at least 12 hours. Also, you have to make sure that the leak has been fixed and that the area where you are going to do the repairs is moisture free.

When the area is already completely dry, the next step is to replace the damaged part with a piece of drywall that is fitted and blended in to the existing wall in order for it to become unnoticeable. There are water resistant drywalls available today and this is basically the best type of drywall that you can use for repairing or replacing water damaged drywall.

For larger holes, you will need a plywood backer board in order to have a place to fasten the replacement drywall. After securing the patch, the next step is to applying fiberglass drywall tape and covered with drywall mud. After the mud has cured, the next step is to sand the joints in order to ensure a flat and smooth finish and get it ready for painting.

These are the basics of repairing a water damaged drywall. As you can see, it is relatively easy to repair water damaged drywall.

Now you can be a confident expert on Drywall. OK, maybe not an expert. But you should have something to bring to the table next time you join a discussion on Drywall.

About the Author
By Anders Eriksson, feel free to visit this new site for my swedish customers: Billigt Webbhotell – from SEK 10:- per month!

If you have even a passing interest in the topic of Drywall, then you should take a look at the following information. This enlightening article presents some of the latest news on the subject of Drywall.

First of all, the drywall is a popular term for pre-fabricated plaster wall panels. These things are quite easy to install but you have to keep in mind that it will also require a lot of hard work if you ever need to repair it. This is why you have to avoid the basic mistakes of drywall installation in order for you to save yourself time, money and headache of redoing the entire job.

So, here are some tips that will be able to help you install drywall properly, which will be able to help you avoid making the most common mistakes in drywall installation. With these tips, you will be able to avoid the common drywall installation mistakes, which means that you will also avoid costly repair.

One great tip when installing drywall will concern the surface in which the drywall will be installed. The walls should be flat and the framing should be straight at right angles. If there are bowed rafters or studs, it should first be planed in order to flatten them before you begin your work in installing the drywall.

To test the walls if it is flat and straight, you can stretch a piece of string across it. This will also help you determine if the studs are all on the same place. Try redoing this process if necessary in order for you to be a hundred percent sure that the studs are in the proper place.

If your Drywall facts are out-of-date, how will that affect your actions and decisions? Make certain you don’t let important Drywall information slip by you.

You also have to remember that cutting drywall should not involve sawing at the panel until all the sections are already separate. If you don’t follow this, you will only end up with a prematurely dull utility knife and a scratched surface underneath. You should consider drawing a line across the panel of drywall that you wish to cut. To make sure that the line is completely straight, you have to use a drywall T-square.

Then, you should score down the line just deep enough to cut through the backing paper. After this, you just life the panel and snap it right down the guide-line. To completely cut the panel, you should slice through the remaining layer of backing paper. After cutting, you have to smooth the rough edges made by the cutting.

A lot of people go overboard when applying the joint compound or mud whenever they are taping or mudding the drywall. Some people also go overboard when working their joint. Sometimes, they do it too early or too much, which is definitely a no-no in drywall installation.

Always remember that you first need to apply the tape and spread a thin layer of compound over the tape in order to embed it. Then, you should leave it to dry before scraping it slightly to level any high spots. The, you need to apply the second layer if you need to.

At first, drywall hanging may seem very simple to do. However, you will find that hanging drywall will require a process. Always keep in mind that when it comes to installing drywall properly, there are no shortcuts. You have to follow the step-by-step process in order to ensure high quality work.

About the Author
By Anders Eriksson, feel free to visit this new site for my swedish customers: Billigt Webbhotell – from SEK 10:- per month!

Now that you’ve managed to install your drywall without any major incidents, the next thing that you have to work hard on is to put in a perfect finish. You need to consider that this is a major stumbling block for all do-it-yourselfers. It would seem next to impossible to put in a great finish for your drywall but before you start tearing your hair out, you will see that there are a lot of drywall finishing tips that you can learn which will be able to get you a great finish on your drywall.

You need to keep in mind that when finishing your drywall, it is always better to do things slowly and get it right the first time. This will save you a lot of time as well as a lot of money on costly repairs that you have to do later on if you are not patient when finishing your drywall.

The key to finishing drywalls is by practicing a lot. You have to remember that practice makes perfect and even professionals who install drywalls can make mistakes. You can follow the process of finishing drywalls but it is up to you to get the specific feel for applying the drywall mud and also to finish the drywall properly.

After you apply the drywall, the next step is to start applying the drywall tape to the joint seems. Try to use paper drywall tape on the corners and fiberglass tape for the flat seams. It will be a lot more convenient for you and it will also provide your drywall with better strength.

If your Drywall facts are out-of-date, how will that affect your actions and decisions? Make certain you don’t let important Drywall information slip by you.

The great thing about the fiberglass drywall tape is that it has a self sticking adhesive, which can be rolled on before the drywall mud is applied. On the other hand, you have to apply a layer of drywall mud first before you apply the drywall paper tape.

Now, after applying the fiberglass tape, you can then apply the drywall joint compound. It is highly recommended that you use at least a 5 inch drywall trowel for this application in order to give the job a professional finish. For the drywall seams, use a 12 inch cement trowel as it works better.

The 12 inch cement trowel will allow you to spread more drywall joint compound on the seams for your first application. When you apply the first layer of joint compound, let it dry first before you apply the next layer. Doing this will allow you to continue spreading the drywall mud evenly up until the seams are flat and unnoticeable

After you have applied at least 3 coats of joint compound on your drywall and after it has dried thoroughly, the next step is to sand the area until it is smooth and ready to paint.

These are basically the steps on how to finish your drywall. Always remember that you may encounter some problems on the way. But, if you are careful and you follow the mentioned tips, you can be sure that you will be able to have a professional finish on your drywall.

About the Author
By Anders Eriksson, feel free to visit this new site for my swedish customers: Billigt Webbhotell – from SEK 10:- per month!

We all want our homes to look beautiful inside and out. This is why a lot of people try to finish their own drywall in order for them to make sure that the quality of the finish is almost perfect and also make sure that the work that is put in the finishing is of good quality and there are no shortcuts.

However, if you are a first timer in doing drywall finishing jobs, you will find it difficult to do. In fact, finishing drywall is not easy to do that it takes years before you get pretty good at finishing drywall.

Basically, the key to a perfect drywall finishing is practice. Practicing this skill will allow you to become really good at finishing drywalls. With practice, you can be sure that you will be able to get that professional quality finish for your drywall and really have a flawless finish that will make your home look a lot better.

You need to remember that the process is very easy to explain and do but it will be you who will need to get a specific feel whenever you are applying the mud and finishing the drywall properly. What this means is that you will be the one to observe and feel if you did a proper job with the finishing.

So, here are the step by step instructions on how to properly finish your drywall.

If you base what you do on inaccurate information, you might be unpleasantly surprised by the consequences. Make sure you get the whole Drywall story from informed sources.

After installing the drywall and getting it ready for finishing, the first thing that you need to do is to start applying the drywall tape to the joint seams. One good trick in doing this is to apply fiberglass tape for the flat seams and paper drywall tape on the corners.

Basically, the fiberglass drywall tape has a self sticking adhesive. This means that it can be rolled on before the drywall mud is applied. For the paper drywall tape, you will need to have a layer of drywall mud applied first before you apply the tape.

After applying the fiberglass tape, you can now apply the drywall joint compound. It is highly recommended that you use a 5 inch drywall trowel for this. For finishing drywall seams, you may want to try using a 12 inch cement trowel as it will allow you to spread more drywall joint compound on the seems for the first application.

After the first application, let the joint compound dry before you apply the next layer. To put it in simple terms, you will continue on spreading the mud evenly until the seams are flat and are now unnoticeable.

For that flawless finish, you can sand the area where you applied the drywall joint compound in order to smoothen it and get it ready for painting.

These are the step by step instructions on how you can get that professional finishing for your drywall. Always remember that you may not get this right the first time but with practice, you will be able to get that professional finish you always wanted to achieve.

About the Author
By Anders Eriksson, who just launched this great product..
- Are you looking to get traffic to your website? Introducing… Free Google Traffic System!!

We all want to have a better looking interior in our homes. This is why we spend a lot of money in finishing our drywalls. In fact, some people even hire interior decorators and designers to finish drywalls. This can prove to be very costly and if you want to save money, you can try doing the project yourself.

Before you attempt this kind of project, you have to remember that finishing drywall is a craft that requires a lot of skill. This kind of skill can take years to master and perfect but if you are a serious do-it-yourselfer, you will find that you will be able to do a great job with excellent results.

When embarking on this kind of project, you have to keep in mind that you have to have all the proper tools in order for you to avoid making mistakes as you work in finishing your drywall. Besides, there’s nothing more frustrating to find out you are missing some tools when you are halfway done with your work.

You will need good quality tools to work with. It is highly recommended that you should never start on any drywall finishing projects if you don’t have quality tools with you. For starters, you may want to get different drywall knives in various sizes. Each particular knife will work better in certain places and situations. But, if you are not a professional drywall finisher, you wouldn’t want to purchase all these knives. It is recommended that you get at least three different drywall knives.

If you are going to apply drywall tape, it is recommended that you use 3?, 4?, and 6? knife. Go for the one that you are most comfortable with and you have to remember that you need to choose accordingly.

Once you begin to move beyond basic background information, you begin to realize that there’s more to Drywall than you may have first thought.

For bedding the tape down or applying a second application, you may want to use a 10? or 12? knife. For the final float or application, you should get a 12? or even a 14? knife to get the job done.

Stainless steel knives are great but they can be stiff and harder to work with. Blue steel knives are great because they are more flexible, which will make it easier for you to work with than with the stainless steel blades. The only problem with the blue steel knives is that they are prone to rusting when you leave it in water for too long.

The proper tools are essential if you want to have excellent results when finishing drywall. Always keep in mind that drywall finishing requires a lot of skills. You have to be patient and you need to have the proper tools to work with.

By having the proper tools, you can be sure that you will be able to get the best results possible when finishing your drywall. Today, you will be able to find all the tools you need for drywall finishing in almost any hardware or hobby stores. Just remember that cheap doesn’t always mean good.

Go for tools that are known to provide great quality and tools that will be able to get the job done efficiently and give you near-perfect results.

So now you know a little bit about Drywall. Even if you don’t know everything, you’ve done something worthwhile: you’ve expanded your knowledge.

About the Author
By Anders Eriksson, who just launched this great product..
- Are you looking to get traffic to your website? Introducing… Free Google Traffic System!!

In today’s world, it seems that almost any topic is open for debate. While I was gathering facts for this article, I was quite surprised to find some of the issues I thought were settled are actually still being openly discussed.

If you ask anyone who installs drywalls professionally, they will tell you that installing it is almost an art. You have to remember that installing drywalls is not as simple as hammering nails in it in order to install it. It’s much more complicated than that and it will take you years before you actually perfect the process of installing drywalls and really get a great and professionally looking finish.

As a do it yourselfer, you need to keep in mind that installing drywalls can be done even without extensive experience. It’s not that hard but there are some things that you have to know about the process in order for you to do it without making lots of costly mistakes.

The first thing that you have to keep in mind is to have everything that you need before you start. You have to have the tools and equipments that you need before you start installing the drywall. For this kind of project, you will need several things, such as joint compound, hand knife spreader, joint tape, application knife, and bread pan. You will also need a corner taping tool.

Once you have the tools that you need, you are now ready to start installing your drywall.

Another tip that you have to keep in mind is that the drywall demands precise measurement. You also need to make sure that every panel you install is tightly secured to the supports or the foundations that it is nailed to. Besides, there is nothing more embarrassing to have your newly installed drywalls fall down all of a sudden when you are entertaining visitors around your home.

If your Drywall facts are out-of-date, how will that affect your actions and decisions? Make certain you don’t let important Drywall information slip by you.

You also have to remember that the nails you use should be long enough in order to keep the panels secured on their supports. You can also use screws if you want or you can use them in conjunction with the nails to provide more support.

When installing drywall, you have to remember that mixing the cement or mud to the right consistency is essential. The consistency of the mix should be like icing on a cake and it shouldn’t be too stiff or too loose. To check for its consistency, scoop up some drywall mud with a trowel and hold the trowel upside down. The mud should not fall down when you do this. And, when applying the cement or mud in to the drywall joints, it shouldn’t take too much effort or you should be able to do this easily.

You also have to remember that when you are on the process of mixing the mud, do not whip the cement. The whipping action will attract air in to the mud, which can form bubbles when you apply it in the drywall seams.

Another great tip that you may want to remember when it comes to finishing drywalls is to use mesh tape instead of paper tape. Because of the fact that mesh tape is porous, it will be able to provide you with a much smoother finish after applying the mud or cement.

Remember these tips and you can be sure that you will have a professional looking finish whenever you install drywalls in your home.

It never hurts to be well-informed with the latest on Drywall. Compare what you’ve learned here to future articles so that you can stay alert to changes in the area of Drywall.

About the Author
By Anders Eriksson, who just launched this great product..
- Are you looking to get traffic to your website? Introducing… Free Google Traffic System!!